Component Tests and General Diagnostics

INPUT/TURBINE SPEED SENSOR
Inspection Of Resistance
1. Refer to Service and Repair for disconnection of the input/turbine speed sensor connector.

Measure Resistance Between The Terminals Of The Sensor:

2. Measure resistance between the terminals of the input/turbine speed sensor.

Resistance: 253-6O4 Ohms @ (ATF temperature) -40-16O°C (-4O-32O°F)

3. If not correct, replace the input/turbine speed sensor.
4. Refer to Service and Repair for connection of the input/turbine speed sensor connector.