Transaxle Range Switch

R Position Switch:

1 Range Switch:

2 Range Switch:

D Range Switch:

P, N Position Switch:

TRANSAXLE RANGE SWITCH
- If there is an open or short circuit in the transaxle range switch or harness, diagnostic trouble code P0705 is displayed by the on-board diagnostic system, and O/D OFF mode is canceled.
- If a malfunction occurs in the wiring of the transaxle range switch, the powertrain control module cannot determine the range position, and shifting may be abnormal in D, 2, and 1 ranges. There may not be a shift to fourth gear.

NOTE:
- If fuse burnt out while driving, powertrain control module judges condition as the R position.
- When ignition switch is turned from OFF to ON after fuse burnt out, powertrain control module judges condition as the R position.