Clearing Trouble Codes

CLEARING DIAGNOSTIC TROUBLE CODES




1. Connect the Special Service Tools (SST)s New Generation Star (NGS) tester to the Data Link Connector 2 and battery.

NGS Display:

^ Cancel the diagnostic trouble code memory by using the (NGS).

2. Remove the (NGS) from the data link connector 2.




3. Drive the vehicle at 50 km/h (31 mph), and depress the accelerator pedal fully to activate kickdown. Stop the vehicle gradually.
4. Reconnect the SST (NGS) to the data link connector 2 and battery.
5. Turn the ignition switch to ON.
6. Verify that no diagnostic trouble codes are displayed.
7. Remove the SST from the data link connector 2.