Audio Anti-Theft System Deactivation

The anti-theft function is available as an option for the audio system. Before removing the battery ground cable or disconnecting the audio system power source, obtain the code number to reset the system when repairs are complete.
1. Turn ignition switch to ACC. position. "CODE" will flash on audio system display.
2. Press Scan and AUTO-M buttons simultaneously for approximately 1.5 seconds until bars appear on display.
3. Use channel buttons 1 through 4 to input selected code number, pressing button 1 for first digit, 2 for second digit, 3 for third and 4 for last digit. Input number within 10 seconds. If display is deleted, repeat procedure.
4. With code number displayed, press and hold Scan and AUTO-M buttons for approximately 1.5 seconds until a beep is heard. "CODE" will flash for approximately 15 seconds. After it disappears, system is deactivated.
5. Three consecutive errors, including turning ignition switch to Off position and disconnecting audio unit will activate anti-theft system and render audio unit completely inoperative. If this occurs, contact manufacturer distributor.
6. If "Err" appears on display, repeat procedure.