System Specifications

Intake:

Intake:

Upper Engine:

Head Torque Sequence:

Tighten the bolts in two or three steps in the order shown.
Tightening torque:
23.1-25.9 N.m (17.0-19.1 ft-lb)
Put a paint mark on each bolt head.
Using the marks as a reference, tighten the bolts by turning each 85°-95° in the sequence shown.
Further tighten each bolt by turning another 85°-95°.

Timing Components:

Lower Engine:

Lower Cylinder Block Bolts:

Lower Cylinder Block Torque Sequence:

Torque Sequence:

Lower Cylinder Block Torque Sequence: