Shift Interlock: Service and Repair

SHIFT-LOCK ACTUATOR REPLACEMENT
1. Disconnect the negative battery cable.
2. Remove the rear console box and center panel.





3. Remove the indicator screws and lift up the indicator panel.
4. Disconnect the shift-lock actuator connector.
5. Disconnect the park position switch connector.
6. Remove the shift-lock actuator.
7. Install the new shift lock actuator.
8. Connect the park position switch connector.
9. Connect the shift-lock actuator connector.
10. Install and adjust the indicator panel.
11. Install the center panel and rear console box.
12. Connect the negative battery cable.





13. Verify correct operation of the shift-lock system.