Vehicle Speed Sensor: Service and Repair

Replacement
1. Disconnect the negative battery cable.
2. Remove the air cleaner assembly, battery and battery carrier.
3. Disconnect the speedometer sensor connector.




4. Remove the speedometer sensor.
5. Apply ATF to a new 0-ring and install it on a new speedometer sensor.
6. Install the speedometer sensor

Tightening Torque: 7.9-10.7 Nm (69.5-95.4 in.lb.)

7. Connect the speedometer sensor connector.
8. Install the battery and battery carrier, air cleaner assembly.
9. Connect the negative battery cable.