With OEM Scan Tool

DIAGNOSTIC TROUBLE CODE NUMBER
Inspection

SST-NGS:

1. Connect the Special Service Tool-New Generation Star Tester (SST-NGS) to the data link connector 2.
2. Refer to the manufacturer-provided instruction manual for the NGS operation.




3. Select "DIAGNOSTIC TEST MODE" function and press trigger.
4. When "NO CODES RECEIVED/SYSTEM PASSED" is displayed, all systems monitored are judged OK.
5. When any of the diagnostic trouble codes is displayed, carry out troubleshooting according to the code.
6. When "LINK MON/TQR ERROR" is displayed, check connection of the NGS.
7. After all problems have been repaired, clear diagnostic trouble codes by performing the "After Repair Procedure".
Clearing Diagnostic Trouble Codes