With SST-New Generation Star Tester (Data Monitor)

Using Special Service Tool-New Generation Star Tester (SST-NGS)




1. Connect the special service tools to the data link connector 2 as shown in the figure.




2. Referring to the New Generation Star Tester (NGS) operation manual, select the PID/DATA MONITOR AND RECORD function.
3. Inspect each powertrain control module (PCM) input/output signal.

NOTE:
- The PID/DATA MONITOR AND RECORD function is to monitor the calculation value of input/output signals in the PCM. Deviation in the value does not always indicate malfunction in the related input/output devices (sensors and solenoids).
- When normal output signal cannot be detected while all input signals are normal, replace the PCM.