With EC-AT Tester (49 GO19 901) and Adapter (49H019 902)

Inspection Using EC-AT Tester (49 G019 901) and Adapter Units (49 H019 902)-(49 B019 9A1)

Assembly Of Special Service Tools:

1. Assemble the special service tools (SST)s as shown above.

View: Control Switch Locations:

2. Set the EC-AT selector switch to position 3.
3. Set the adapter unit vehicle switch to 626/MX-6 position.
4. Set the adapter unit select switch to position A.
5. Turn the ignition switch and the EC-AT tester main switch to ON.
6. Check the indication of the respective light or digital display in each condition, referring to the indication table below.

Indication Table Of Light And Digital Display: