With EC-AT Tester (49 GO19 901C)

Inspection Procedure
When using the EC-AT tester (49 GO19 901C)

Assembly Of Special Service Tools-EC-AT Tester (49 G019 901C):

1. Assemble the special service tools (SST) as shown above.




2. Turn the EC-AT tester select switch to the triangular mark on the panel.
3. Turn the ignition switch and the EC-AT tester main switch to ON.




4. Check the indication of the respective light or digital display in each condition, referring to the indication table below.

Indication Table Of Light And Digital Display: