Fuel Pump Relay: Service and Repair

FUEL FILTER, PRC SOLENOID VALVE, FUEL PUMP RELAY

WARNING: Fuel line spills and leaks are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin and eyes. To prevent this, always complete the "Fuel Line Safety Procedures".

NOTE: The fuel filter must be replaced at the intervals outlined in the maintenance

- Disconnect the negative battery cable.




- Remove in the order shown in the figure, referring to Removal note.
- Install in the reverse order of removal, referring to Installation note.

1. Air intake hose
2. Fuel hoses
3. Fuel filter (high pressure side)
4. PRC solenoid valve (ATX)
5. Fuel pump relay

NOTE: Before removing the fuel pump relay, remove the rear console, front console and side wall.




INSTALLATION NOTE
- Push the ends of the fuel hoses onto the fittings until it stops.
- Install the clips on the fuel hoses.

2-5 mm (0.08-0.19 in.) from the end of hose.