Using EC-AT Tester (49 G019 901) & Adapter Unit (49 H019 902)

EC-AT tester (49 G019 901) and adapter unit (49 H019 902):

WHEN USING THE EC-AT TESTER (49 G019 901) AND ADAPTER UNIT (49 H019 902)
1. Assemble the Special Service Tool (SST).
2. Set the EC-AT selector switch to position 3.
3. Set the adapter unit vehicle switch to the 323 position.
4. Set the adapter unit select switch to position A.
5. Turn the ignition switch and the EC-AT tester main switch to ON.

Indication Table Of Light And Digital Display EC-AT tester (49 G019 901):

6. Check the indication of the respective light or digital display in each condition, referring to the indication table.