Crankshaft

DIMENSIONS
Journal Measurements
Main Journal:
Diameter 49.938-49.956 mm (1.9661-1.9667 inch)
Out of Round (Maximum) 0.05 mm (0.0020 inch)
Crack Pin Journal:
Diameter 44.940-44.956 mm (1.7693-1.7699 inch)
Out of Round (Maximum) 0.05 mm (0.0020 inch)

Main Journal Undersize Diameters
0.25 mm (0.01 inch) 49.701 49.708 mm (1.9569-1.9570 inch)
0.50 mm (0.02 inch) 49.454-49.458 mm (1.9470-1.9471 inch)
0.75 mm (0.03 inch) 49.204-49.208 mm (1.9372-1.9373 inch)

TIGHTENING SPECIFICATIONS
Main Bearing Cap Bolts 54-58 Nm (40-43 ft. lbs.)