Dechoke Control

DECHOKE CONTROL




1. Connect the Special Service Tools New Generation Star (NGS) tester to the data link connector 2.




2. Select the PID/DATA MONITOR AND RECORD function of the NGS.
3. Select"INJ R"and"INJ L" on the NGS display. NGS measures and shows the fuel injector pulse width.
4. Turn the ignition switch to START and verify that the engine start.
5. Depress the accelerator pedal to wide open throttle and turn the ignition switch to START. Verify that the fuel injector pulse width becomes 0 ms and engine does not start while cranking.
6. If not as specified, check the PCM terminal 3B voltage. (Throttle Position Sensor)