Combination Switch: Testing and Inspection

Inspection
1. Remove the combination switch.
2. Check for continuity between the combination switch terminals as indicated.
3. If not as specified, replace the necessary parts.







Headlight Switch







Turn Switch













Windshield Wiper and Washer Switch

Clock Spring
1. Deactivate the audio antitheft system, if installed.
2. Disconned the negative battery cable.




3. Disconnect the orange and blue clock spring connectors.




4. Remove the driver-side air bag module.







5. Check for continuity between the terminals of the clock spring as shown.

NOTE: When terminals 1B and 1C are disconnected from the vehicle's main harness, they are shorted to prevent unexpected air bag deployment.

6. If not as specified, replace the clock spring.

Clock Spring Adjustment




Before installing the steering wheel, adjust the clock spring.
1. Set the front wheels straight ahead.

CAUTION: The clock spring will break if overwound Do not forcibly turn the clock spring when turning it.

2. Turn the clock spring clockwise until it stops.




3. Turn the clock spring counterclockwise 2.5 turns.




4. Align the mark on the clock spring with that on the outer housing.