Antitheft and Alarm Systems: Description and Operation

Alarm Conditions
If the antitheft system protection has been activated, any one of the following conditions will trigger the system:
- Disconnected battery cable
- Discharged battery
- Disconnected audio unit connectors

If the system is triggered, the audio unit will then be inoperative when it is reconnected to a power source, and "code" will flash on the display until the preselected code number is input.

Setting Code Number
Complete steps 1-3 within 10 seconds or the setting procedure will be canceled.
1. Turn the ignition switch to ACC and then turn off the audio unit.




2. Press and hold the SCAN and AUTO-M buttons simultaneously for approximately 1.5 seconds until "code" appears on the display.




3. Press the SCAN and AUTO-M buttons again until bars appear on the display.




4. Select a personal code number and record it before inputting it. If the number is input and then forgotten, it can- not be canceled, and if the unit is disconnected again, the audio unit will be inoperative.




5. Use channel buttons 1-4 to input the selected code number. Press button 1 for the first digit, 2 for the second, 3 for the third, and 4 for the last digit. Input the number within 10 seconds. If the display is deleted, repeat the procedure from step 1.




6. With the code number displayed, press and hold the SCAN and AUTO-M buttons for approximately 1.5 Seconds until a beep is heard. "Code" will be displayed for approximately 5 seconds. After it disappears, the code number is set.

7. If "Err" (error) appears on the display, repeat the procedure from step 1. If input error is repeated three times, turn the ignition switch to LOCK and repeat the procedure from step 1.

Canceling the Code Number
Complete steps 1-3 within 10 seconds or the canceling procedure will be canceled.
1. Turn the ignition switch to ACC and then turn off the audio unit.




2. Press and hold the SCAN and AUTO-M buttons simultaneously for approximately 1.5 seconds until "code" appears on the display.




3. Press the SCAN and AUTO-M buttons again until bars appear on the display.

CAUTION: Three consecutive errors, including turning the ignition switch to LOCK and disconnecting the audio unit, will activate the antitheft system and render the audio unit completely inoperative. If this occurs, contact your distributor.




4. Use channel buttons 1-4 to input the current code number. Press button 1 for the first digit, 2 for the second, 3 for the third, and 4 for the last digit. Input the number within 10 seconds. If the display is deleted, repeat the procedure from step 1.




5. With the code number displayed, press and hold the SCAN and AUTO-M buttons for approximately 1.5 seconds until a beep is heard. "Code" will be displayed for approximately 5 seconds. After it disappears, the code number is canceled.

CAUTION: Three consecutive errors, including turning the ignition switch to LOCK and disconnecting the audio unit, will activate the antitheft system and render the audio unit completely inoperative. If this occurs, contact your distributor.

6. If "code" appears on the display, the code number is not canceled. Repeat the procedure from step 3. If "Err" (error) appears on the display, repeat the procedure from step 1.

Canceling Antitheft Operation
Properly input the selected code number to deactivate the antitheft system and resume normal audio operation.
1. Turn the ignition switch to ACC. ("Code" will flash on the display.)




2. Press the SCAN and AUTO-M buttons simultaneously for approximately 1.5 seconds until bars appear on the display.




3. Use channel buttons 1-4 to input the selected code number. Press button 1 for the first digit, 2 for the second, 3 for the third, and 4 for the last digit. Input the number within 10 seconds. If the display is deleted, repeat the procedure from step 1.




4. With the code number displayed, press and hold the SCAN and AUTO-M buttons for approximately 1.5 seconds until a beep is heard. "Code" will flash for approximately 15 seconds. After it disappears, the new code number is set.

CAUTION: Three consecutive errors, including turning the ignition switch to LOCK and disconnecting the audio unit, will activate the antitheft system and render the audio unit completely inoperative. It this occurs, contact your distributor.

5. If "Err" (error) appears on the display, repeat the procedure from step 1.