Audio Unit

Removal




1. Using a tape-wrapped flathead screwdriver, pry out the audio unit service hole covers of the audio unit and CD changer. Keep the hole covers for reinstallation.

NOTE: Two SST sets are required when moving an audio unit that includes the CD changer controller.




2. With the beveled parts of the SST facing inward, insert them into the audio unit.
3. Pull the SST outward and rearward to slide out the audio unit.
4. Disconnect the audio unit connectors and antenna jacks.




Installation
1. Install the audio unit service hole covers.
2. Connect the audio unit connectors and antenna jacks.
3. Insert the audio unit until each clip clicks. Make sure the wiring harness and antenna feeder do not become trapped.