Front Drive Belt Replacement

1 Remove the generator/drive belt.
2. Set the wrench on the tensioner pulley lock bolt as shown.

CAUTION: Do not apply torque over 47 Nm (35 ft lbs.) to the lock bolt. It can damage the tensioner.

3. Using a wrench, turn the tensioner pulley lock bolt clockwise to relieve tension to the drive belt.
4. Remove the drive belt.
5. Reinstall the drive belt or install a new drive belt.





6. Check that the drive belt auto tensioner indicator mark is not exceeding the limit. If exceeded, replace the drive belt.
7. Install the generator drive belt.