Quick Diagnosis Charts

OUTLINE
The Quick Diagnosis Chart shows various problems and the various components that might be the cause of the problem.

Part 1 Of 2:

Part 2 Of 2:

1. Components indicated in the "On-board diagnostic" row of the QUICK DIAGNOSIS CHART (I) are diagnosed by the powertrain control module on-board diagnostic system. The NGS can be used for easy retrieval of the diagnostic trouble codes.
2. Components indicated in the "Adjustment" row of the QUICK DIAGNOSIS CHART (I) indicate that there is a possibility that the problem may be the result of an incorrect adjustment. Check the adjustment of each component, and readjust if necessary.
3. Components indicated in the "Stall Test" row of the QUICK DIAGNOSIS CHART (I) can be checked for malfunction by observing the results of the stall test.
4. Components indicated in the "Time Lag Test" row of the QUICK DIAGNOSIS CHART (I) can be checked for malfunction by observing the results of the time lag test.
5. Components indicated in the "Line Pressure Test" row of the QUICK DIAGNOSIS CHART (I) can be checked for malfunction by observing the results of the line pressure test.
6. Components indicated in the "Road Test" row of the QUICK DIAGNOSIS CHART (I) can be checked for malfunction by observing the results of the road test.

Part 1 Of 4:

Part 2 Of 4:

Part 3 Of 4:

Part 4 Of 4:

7. QUICK DIAGNOSIS CHART (II) shows the relationship between the troubleshooting item and inspection point.