L Range Test

L RANGE (EXCEPT HOLD)
1. Shift the selector lever to L range.
2. Accelerate the vehicle with half- and full-throttle opening.
3. Verify that 1->2 upshift and downshift are obtained. The shift points must be as shown in the L range shift diagram.
4. Drive the vehicle in second gear and verify that kickdown occurs for 2->1, and that the shift point is as shown in the L range shift diagram.
5. Decelerate the vehicle and verify that engine braking effect is felt in second gear.

L RANGE (HOLD)
1. Select HOLD mode.
2. Accelerate the vehicle with half- and full-throttle opening, and verify that first gear is held.