S Range Test

NOTE: There is TCC non-operation in the following conditions.
a. The engine coolant temperature is below 60°C (140°F).
b. The closed throttle position switch is ON.
c. The brake switch is ON.






S RANGE (EXCEPT HOLD)
1. Shift the selector lever to S range.
2. Accelerate the vehicle to half- and full throttle opening.
3. Verify that 1->2 and 2->3 upshifts and downshifts are obtained. The shift points must be as shown in the vehicle speed at shift-point table.
4. Drive the vehicle in third and second gear and verify that kickdown occurs for 3->2, 3->1, 2->1, and that the shift points are as shown in the table concerning vehicle speed at shift-point.
5. Decelerate the vehicle and verify that engine braking effect is felt in first, second, and third gear.
6. Drive the vehicle and verify that TCC operation is obtained.

S RANGE (HOLD)
1. Select HOLD mode.
2. Accelerate the vehicle to half- and full throttle opening, and verify that second gear is held.
3. Decelerate the vehicle and verify that engine braking effect is felt.
4. Drive the vehicle and verify that TCC operation is obtained.