Manual Door Mirror - Vibrates

Bulletin No. 024/98

Issued 11/04/98

Revised

Category
S (09)

Applicable Model/s
1995-98 Protege

Subject
DOOR MIRROR VIBRATES (MANUAL TYPE)

APPLICABLE MODEL(S)/VINS
All 1995-98 Proteges with VINs lower than JM1 BC14** W0 198146.

DESCRIPTION

The door mirror, manual type (non-power), may vibrate when driving, idling in gear or closing the door. This is caused by excessive clearance between the door mirror base and base frame detent. A modified mirror (produced after October 14, 1997) is available to repair this concern.

Customers complaining of this concern should have their vehicle repaired using the following procedure.

REPAIR PROCEDURE

1. Verify customer complaint.

2. Replace mirror with modified mirror.





Note
^ The part number has not changed. Be sure to confirm that the mirror production date is after October 14, 1997 as shown in the illustration.

3. Verify repair.





PART(S) INFORMATION

WARRANTY INFORMATION

Note
^ This information applies to verified customer complaints on vehicles covered under normal warranty Refer to the SRT microfiche for warranty term information.

Warranty Type A
Symptom Code 83
Damage Code 97
Part Number Main Cause BC1M 69 120* or BC1M 69 180*
Quantity 1
Operation Number/Labor Hours S1801ARX / 0.2