Replacement

WARNING:
^ Fuel vapor is hazardous. It can very easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel.

^ Fuel line spills and leaks are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin and eyes. To prevent this, always complete the "Fuel Line Safety Procedures," refer to Powertrain Management.








1. Disconnect the negative battery cable.
2. Drain the engine coolant, refer to Cooling System.
3. Remove the timing belt.
4. Remove the air cleaner and front pipe, refer to Powertrain Management and Exhaust System.
5. Remove the exhaust manifold.
6. Remove in the order indicated in the table.
7. Install in the reverse order of removal indicated in the table.
8. Install the exhaust manifold.
9. Install the front pipe and air cleaner.
10. Install the timing belt.
11. Fill the radiator and radiator reservoir with the specified amount and type of engine coolant.
12. Connect the negative battery cable.
13. Start the engine and;
^ check the engine oil and engine coolant leakage.
^ check the ignition timing and idle speed.
14. Perform Compression Check.