Headlamp: Adjustments

1. Adjust the tire air pressure to the specification.
2. Fill the fuel tank and remove excess cargo.
3. Position the unloaded vehicle on a flat, level surface.
4. Rock the vehicle by hand several times.
5. Seat one person in the driver's seat.
6. Set the distance between the headlight and the wall to 3m (10 ft).
7. While adjusting one headlight, disconnect the connector of the other one.
8. Adjust the headlights by turning the adjusting screws as shown in the figure.

NOTE
^ If the adjusting screws are tightened first, then loosened, they may continue to loosen when the vehicle is in motion and cause the headlights to become unaligned.