Fluid - M/T: Service and Repair

1. Remove the drain plug and the washer.
2. Drain the oil into a suitable container.
3. Install a new washer and the drain plug. Tighten to 40 - 58 Nm (29 - 43 ft. lbs.).
4. Remove the oil level plug and the washer. Add the specified amount and type of oil through the oil level plug hole until the level reaches the brim of the oil level plug hole.
5. Install a new washer and the oil level plug. Tighten to 40 - 58 Nm (29 - 43 ft. lbs.).