Audio System - Sound Cuts Out With Blower ON

T01597

AUDIO SOUND CUTS OUT WHEN BLOWER MOTOR OPERATES

APPLICABLE MODELS/VINs
1997 Protege with FMS audio Systems (I.D # ) 4262) and a VIN of JM1BC14**V0132779 and lower.

NOTE:
The audio system's I.D. number is printed on the cassette door.

DESCRIPTION

The audio system's sound may cut out when the blower motor is activated. This concern is caused by a current surge transmitted to the audio unit through the harness between the audio system and the speakers. This current surge affects the audio system's IC (Integrated Circuit).

The audio unit's IC is now modified to protect against current surge.

REPAIR PROCEDURE

1. Verify the concern.

2. Inspect the cassette door for the appropriate number.

^ If 4262 is printed on the door, replace the audio unit with an exchange unit.

^ If 4262 is not printed on the cassette door, refer to the workshop manual for troubleshooting and repair information.





PARTS INFORMATION

NOTE:
All exchange units incorporate modified ICs.





WARRANTY INFORMATION

(Applies To Verified Customer Complaints On Vehicles Covered Under Normal Warranty. Refer To the Microfiche For warranty Term Information.





Disclaimer