Bearing Cover Component Disassembly/Assembly

BEARING COVER COMPONENT DISASSEMBLY/ASSEMBLY
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly indicated in the table.





Bearing race disassembly note
^ Remove the bearing race by using a pin punch and a hammer.





Assembly procedure
1. Apply ATF to the new O-ring and install in to bearing cover.

O-ring inner diameter
82.9 mm (3.264 in)

2. Press the new bearing race into the bearing cover.





3. Press the new oil seal into the bearing cover by using the SST