Stall Test

1. Shift the selector lever to D range.

CAUTION: If the accelerator pedal is depressed for longer than 5 seconds while the brake pedal is depressed, the transaxle could be damaged. Therefore, do stems 2 and 3 within 5 seconds of each other.

2. Firmly depress the brake pedal with the left foot, and then gradually depress the accelerator pedal with the right.
3. When the engine speed no longer increases, quickly read the engine speed and release the accelerator.
4. Shift the selector to N position and let the engine idle for 1 minute or more to cool the ATF.
5. Perform stall tests for the remaining ranges and position in the same manner. Engine stall speed should be within 2,400 - 2,700 rpm.
a. 2 range
b. 1 range
c. R position