Antenna, Radio: Service and Repair

REMOVAL



1. Disconnect the negative battery cable.
2. Remove the driver's side front scuff plate.
3. Remove the driver's side front side trim.
4. Disconnect the antenna jack.




5. Remove the screw to pull out the pillar antenna.

INSTALLATION



1. Tape the antenna jack to the drain pipe.
2. Pass the antenna feeder and drain pipe through the A-pillar from the hole in the roof.




3. Connect the antenna feeder and install the pillar antenna.
4. Install the driver's side front side trim.
5. Install the driver's side front scuff plate.
6. Connect the negative battery cable.