Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1997 >> Protege LX L4-1489cc 1.5L DOHC MFI >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Testing and Inspection >> Component Tests and General Diagnostics >> Electrical Signal Inspection >> Electrical Signal Inspection Procedures >> Using EC-AT Tester (49 G019 901 B)

Using EC-AT Tester (49 G019 901 B)

CAUTION: Do not connect the NGS to the data link connector 2 when the EC-AT tester is connected the Powertrain Control Module. Doing so can cause incorrect test results.

Using EC-AT Tester (49 G019 901 B)




1. Assemble the Special Service Tool.
2. Set the EC-AT selector switch to position 3.
3. Set the EC-AT tester vehicle switch to the 323 position.
4. Set the EC-AT tester select switch to position A.
5. Turn the ignition switch and the EC-AT tester main switch to ON.




6. Check the indication of the respective light or digital display in each condition, referring to image.
pro multis · About Operation CHARM