Front

DISASSEMBLY/ASSEMBLY

Part 1 Of 2:

Part 2 Of 2:

1.Disassemble in the order indicated in the table.
2.Assemble in the reverse order of removal.





CAUTION: Blow the compressed air slowly to prevent the piston from suddenly popping out.

Piston Disassembly Note
- Place a piece of wood in the caliper, then blow compressed air through the hole to force the piston out of the caliper.





Piston Seal Disassembly Note
- Remove the piston seal from the brake caliper by using the Special Service Tool (SST).





Disc Pad Installation Note (5)
1. Push the piston fully inward by using the Special Service Tool (SST).
2. Install the disc pad.