Steering: Service Precautions

WHEELS AND TIRES REMOVAL/INSTALLATION
The removal and installation procedures for the wheels and tires are not mentioned. When a wheel is removed, tighten it to 89 - 117 Nm (66 - 86 ft. lbs.).

POWER STEERING COMPONENTS
If any power steering fluid line has been disconnected anytime during the procedure add ATF M-III or equivalent (e.g. Dexron (R) II, bleed the fluid line(s), and inspect for leakage after the procedure has been completed.

CONNECTORS DISCONNECTION/CONNECTION
Disconnect the negative battery cable before doing any work that requires handling of connectors. Connect the negative battery cable only after the work is completed.