Steering Wheel: Service and Repair

REMOVAL/INSTALLATION
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.

Steering Wheel Removal Note (3)

CAUTION: Do not try to remove the steering wheel by hitting the shaft with a hammer. The column will collapse.

1. Set the vehicle in the straight-ahead position.
2. Remove the steering wheel by using a suitable puller.

Intermediate Shaft, Steering Shaft Component Installation Note (11 & 9)

CAUTION: Do not apply the shock in the axial direction of the shaft.

NOTE: If the tilt lever does not move easily, loosen the D nuts, tap the lower bracket at the point shown and retighten.





1. Tighten bolt A after tightening bolt B.
2. Tighten bolt C with the steering shaft at its upper most tilt position.
3. After installation, lightly tap the lower bracket at the point shown by using a hammer to verify correct installation.

Steering Wheel Installation Note (3)
Set the wheels in the straight-ahead position, and install the steering wheel.