Repairable Range of Polypropylene Bumpers

REPAIRABLE RANGE OF POLYPROPYLENE BUMPERS

The three type of damaged bumper shown below are considered repairable. Although a bumper with greater damage could also be repaired, it should be replaced with a new one because such repair would detract from the look and quality of the bumper. In addition, such repair is not considered reasonable in term of work time.

Repairable Bumper




1. A bumper with a hole less than 50mm (1.97 in) in diameter.




2. A bumper with a crack less than 100mm (3.94 in) in length.




3. A bumper with a crack less than 100mm (3.94 in) in length that is less than half of the width of the bumper.