Efficient Installation of Body Panels

EFFICIENT INSTALLATION OF BODY PANELS

Checking Preweld Measurements And Watching




- Align to the standard reference dimensions, based upon the body dimensions illustration, so that new part are installed in the correct position.

Welding Notes:




- For the number of weld point, welding should be performed in accordance with the following reference standard.

Spot Welding Notes:




- The shape of the spot welder tip is D = (2 x t) + 3. If the upper panel thickness is different from that of the under panel, adjust to the thinner one.




- Because the weld strength is affected by the shape of the spot welder tip, the optimum condition of the tip should always be maintained.
- Spot weld should be made at point other than the originally welded point.




- Before spot welding, make a trial weld using the same material as the body panel to check the weld strength.