Headlamp: Adjustments

1. Adjust the tire air pressure to the specification.
2. Position the unloaded vehicle on a flat, level surface.
3. Seat one person in the driver's seat.
4. Adjust the headlights by turning the adjusting screws as shown in the figure. Use a "HOPPY" brand aimer or equivalent to aim the headlights to specification numbers 15H20V (found on the headlight lens).

NOTE: If the adjusting screws are tightened first, then loosened, they will continue to loosen when the vehicle is in motion and may cause the headlights to become misaligned.