Trailing Arm: Service and Repair

REMOVAL/INSTALLATION
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. Inspect the rear wheel alignment and adjust it as necessary.

Nut, Cam Plate, and Adjusting Cam Bolt Removal Note (4)





Before loosening the nut, make a mark on the cam plate and the crossmember for reference during installation.

Front Lateral Link Removal Note (6)





1. Support the rear crossmember by using a jack, then remove the crossmember bolts.
2. Lower the crossmember to remove the lateral link bolt.

Nut, Cam Plate, and Adjusting Cam Bolt Installation Note (4)
1. Install the cam plate so that the notch faces the same direction as the adjusting cam bolt.
2. Align the marks made before removing the adjusting cam bolt. Tighten the nut.

Tightening torque: 79 - 116 Nm (57.8 - 86.0 ft. lbs.)