Wheel Hub: Service and Repair

WHEEL HUB, HUB SPINDLE REMOVAL / INSTALLATION





1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.

CAUTION: Leave the nuts on the ball joint studs until removing the axle component. This will keep the axle weight distributed evenly and prevent damage to the link bushings.

Brake Caliper Component Removal Note





- Suspend the brake caliper component as shown in the image.

ABS Sensor Rotor Removal Note





NOTE:
^ The sensor rotor does not need to be removed unless replacing it.
^ Remove the sensor rotor by using a chisel.

ABS Sensor Rotor Installation Note
1. Install a new rear ABS sensor rotor onto the wheel hub.

NOTE: The ABS sensor rotor can be installed in either direction.





2. Using a steel plate and the SST, press the rotor on until it is flush with the wheel hub.