Steering Gear

TIGHTENING SPECIFICATIONS:
Mounting Bolts 44 - 70 Nm (32 - 52 ft. lbs.)
Valve Housing Bolt 17 - 25 Nm (13 - 18 ft. lbs.)
Adjusting Cover Locknut 50 - 68 Nm (37 - 50 ft. lbs.)

GENERAL SPECIFICATIONS:
Maximum Runout 0.4 mm (0.016 inch)
Pinion Shaft Preload Torque 0.5 - 1.3 Nm (4 - 12.1 inch lbs.)
Pull Scale Reading 8 - 14 N (1.8 - 3.3 lbs.)