Auto Control (Away Control) Inspection

With the auto switch fumed on, verify that the steering wheel moves up until the sensor senses the top dead point when the ignition key is pulled out. To solve faulty operation follow the Diagnosis Chart.





NOTE: This control stops operation when the following occur.
1. Auto switch is fumed off.
2. Manual switch is turned on.
3. Sensor senses top dead point.
4. Electric current flows to the motor for more than 10 seconds.
5. Position sensor movement speed is below the set value (1°56'04"/second).
6. Ignition key is inserted again and turned to ON or ACC.