Cruise Control Module: Testing and Inspection

1. Remove the passenger's side front scuff plate.
2. Remove the passenger's side front side trim.
3. Remove the door lock timer unit.
4. Remove the cruise control module without disconnecting the connector.
5. Measure the voltage at the cruise control module terminals.
6. Disconnect the cruise control module connector before checking for continuity at terminal N and T.
7. If not as specified, inspect the parts listed under "Inspection area" and the related wiring harnesses.
8. If the parts and wiring harnesses are okay but the system still does not work properly, replace the cruise control module.







Terminal voltage list (reference)