Operation CHARM
: Car repair manuals for everyone.
Home
>>
Mazda
>>
1998
>>
Protege ES L4-1839cc 1.8L DOHC
>>
Repair and Diagnosis
>>
Powertrain Management
>>
Computers and Control Systems
>>
Engine Control Module
>>
Testing and Inspection
>>
Without SSTs (NGS Tester)
>>
SGT Terminal Test
SGT Terminal Test
SGT TERMINAL TEST WITHOUT SSTs TESTER
1.
Verify that the PCM connector terminal 4F voltage is
approximately 2.0 V when cranking
the engine by using a voltmeter.
2.
If not as specified, inspect the camshaft position sensor.