Charcoal Cannister to Purge Control Solenoid Valve Check

CHECK FROM CHARCOAL CANNISTER TO PURGE SOLENOID VALVE

1. Inspect for loose and wrongly connected hoses between the charcoal canister and the purge solenoid valve.
2. Disconnect the vacuum hose between the charcoal canister and the catch tank from the charcoal canister.




3. Insert hose on the vacuum pump.
4. Apply vacuum to 3.3 kPa (25 mmHg, 1.0 inHg) and they should remain at the specified readings for a minimum of 2 minutes.
5. Return to the Diagnostic Trouble Code Inspection Procedures, and answer questions.