Rear Seat Belt

CAUTION:
The ELR has a spring that will unwind if the retractor's cover is removed. The spring can not be rewound by hand. If this occurs, the ELR will not work properly. Therefore, do not disassemble the retractor.

Rear Seat Belts:

1. Remove the rear seat back.
2. Remove the high-mount brake light.
3. Remove the rear package trim.
4. Remove the rear package front side trim.
5. Remove the C-pillar trim.
6. Remove the trunk side trim.
7. Remove in the order indicated in the table.
8. Install in the reverse order of removal.