Steering Gear

TIGHTENING SPECIFICATIONS:
Mounting Nuts 38 - 51 Nm (28 - 38 ft. lbs.)
Housing Cover Locknut 40 - 49 Nm (29 - 36 ft. lbs.)
Adjusting Cover Locknut 40 - 49 Nm (29 - 36 ft. lbs.)

GENERAL SPECIFICATIONS:
Runout Maximum:
Side With Teeth 0.4 mm (0.016 inch)
Side Without Teeth 0.3 mm (0.012 inch)
Pinion Shaft:
Rotation Torque 1.0 - 1.2 Nm (8.7 - 10.4 inch lbs.)
Pull Scale Reading 9.9 - 12 N (2.2 - 2.6 lbs.)