Antilock Brakes / Traction Control Systems: Service Precautions

DISCONNECTION/CONNECTION

Caution: Brake fluid will damage painted surfaces. If brake fluid gets on a painted surface, wipe it off immediately.

- Tighten the brake pipe flare nut by using the Special Service Tool (SST) (49 0259 770B). Be sure to modify the brake pipe flare nut tightening torque to allow for use of a torque wrench-SST combination.
- If any brake line has been disconnected anytime during the procedure, add brake fluid, bleed the brakes, and inspect for leakage after the procedure has been completed.