Keyless Entry Module: Testing and Inspection

KEYLESS CONTROL MODULE INSPECTION

NOTE: Disconnect the keyless control module connector before checking for continuity at terminal B.

1. Remove the rear package trim.

Terminal Voltage List (Reference):

2. Measure the voltage at the keyless control module terminals as indicated.
- If not as specified, inspect the parts listed under "Inspection area" and the related wiring harnesses.
- If the parts and wiring harnesses are okay but the system still does not work properly, perform troubleshooting. (See POWER DOOR LOCK AND KEYLESS ENTRY SYSTEM SYMPTOM TROUBLESHOOTING.)