Headlamp: Adjustments

HEADLIGHT ADJUSTMENT
1. Adjust the tire air pressure to the specification.
2. Position the unloaded vehicle on a flat, level surface.
3. Seat one person in the driver's seat.
4. Position the vehicle straight ahead.
5. While adjusting one headlight, disconnect the connector of the other.
6. Start: the engine to charge the battery.




7. Adjust the headlights by turning the adjusting screws as shown in the figure. Loosen the screws first, then tighten them.

NOTE: If the adjusting screws are tightened first, then loosened, they will continue to loosen when the vehicle is in motion and may cause the headlights to become misaligned.