Using the SST (104 Pin Breakout Box)

1. Disconnect the PCM connector.




2. Connect the SST (104 Pin Breakout Box) to the PCM as shown.
3. Tighten the connector bolt.

Tightening torque : 7.9 - 10.7 N.m {80 - 100 kgf.cm, 69.5 - 95.4 in.lbf}

4. Turn the ignition switch to ON.

Specification:

5. Measure the voltage at PCM terminal 39.
- If not as specified, check the related harness and intake air temperature sensor resistance.